Group - 6 Notes about Heat Transfer Viny

More and more customers are interested in Alizarin Coating Canada’s Heat transfer vinyl, but they are not quite familiar with how to apply and take care of heat transfer vinyl on garment, which results in a waste of time and materials. Here Alizarin Coating Canada is sharing with you the most important notes that are suitable for all suppliers’ heat transfer vinyl.Note 1: ApplicationStep 1: Feed material into cutter so that the paper carrier is on the bottom.Step 2: Cut image in positive form.Step 3: Weed away excess material leaving only the desired graphic on the carrier with tweezers. Step 4: Place the Pre-Mask tape over the graphic, making sure to smooth out any air bubbles with a plastic squeegee.Step 5: Remove paper carrier by gently “rolling” the carrier off the back of the vinyl. Do not remove the paper carrier until ready to apply to substrate.Step 6: Prepare surface— Be certain the surface of the substrate is smooth, clean and lint-free before positioning the vinyl graphic.Step 7: Position graphic—Use squeegee to remove any air bubbles.Step 8: Remove pre-mask and finish application. Once graphic is positioned as desired, remove the Pre-Mask Tape and repeat pressing of graphic, from center of design out, with fingers. Do not use squeegee directly on vinyl.Note 2: Recommended Applied Materialhard goods, windows, hockey sticks, water bottles, helmets, etc.Note 3: Accessories RequiredPre-Mask Tape (to transfer heat transfer vinyl), plastic squeegee (to remove bubbles), Tweezers (to remove the excess heat transfer vinyl)Note 4: Cutting NotesYou should always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for logos.Note 5: StorageHeat Transfer vinyl should be stored in cool, dry area. For best results, keep unused vinyl rolled until ready to cut and apply.Note 6: how to do laundryMachine wash with warm or cold water and MILD detergent. Turn garment inside out. Dry at normal dryer setting on household machines only. DO NOT USE BLEACH or BLEACH PRODUCTS. Heat transfer vinyl is an ecologically proven polyurethane film with matt, reflection free surface, and is suitable for transferring image onto textiles like cotton, blends of polyester/cotton and polyester/acrylic. It is great for player names and numbers or even adding personalization to corporate wear. What Alizarin Coating Canada’s Heat Transfer Vinyl is different from other suppliers’ is that this material comes with a self-adhesive carrier, which allows you to weed small vinyl letters and fine designs easily. It is much thinner than other Cad Cut Vinyl materials, and because of its thinness, our product is extremely easy to cut and heat applied and perfect for single color or multi-layered applications.If you have any more questions, please come to Alizarin Coating Canada, there are more choices you can make no matter what they are, heat transfer paper or heat press machine, custom letter and number, custom iron on logo and custom T-shirts and so on, Alizarin Canada will offer the most professional instructionTAGS:http://www.hockeycustomjersey.com || custom hockey jerseys,http://www.hockeycustomjersey.com || custom hockeyjersey(edit by dfiugjhgywtf)