Characterization of the mechanical nonlinear behavior ofpiezoelectric ceramics

Abstract:  Abstract A characterization of the nonlinear behavior with high signal excitation in piezoceramic resonators was carried out. The behavior of power devices working at resonance, in which high strains are involved, is explained. A theoretical model previously described is used to explain the motional impedance variation proportional to the square of the motional current. This impedance increase ?Z is independent of the frequency and explains: the nonlinear elasticity that produces the A-F effect, the nonlinear mechanical losses that increase greatly close to the resonance, and the hysteresis phenomenon produced with frequency sweeps. Different methods for measuring the mechanical nonlinear coefficients of piezoceramics with high signal excitation are presented. An experimental method is proposed to measure the mechanical loss tangent and the compliance variations as a function of the mean square strain in the piezoceramic. This consists in measuring the maximum admittance and the series resonance frequency for downward frequencies. At this jumping point, the phase angle remains zero whatever the amplitude of the excitation. Two main coefficients characterizing the material mechanical nonlinearity are deduced. Experimental measurements were carried out to compare the nonlinearity of different ceramic materials in longitudinal and transverse mode